Equipment characteristics

Outer diameter range: 5mm-40mm 40mm-105mm(adjusted according to the range)

Thickness range: 1mm-8mm(adjusted according to the range)

Repeatability: ±0.01mm

Detection speed: 2-12 PCS/SEC (depending on product size)

Test items: outer diameter, inner diameter, side diameter, thickness; Burr, missing material, flow mark, mold dirty, sticky skin, fracture, pitting, rough edge, crack, etc

Station introduction

First station (upper surface) :

Detect the appearance defect of the upper surface of the product. This station is equipped with a camera and a lens

Second station (internal mold line) :

To detect the appearance defects of the inside side of the product, this station is equipped with 4-6 cameras and 46 sets of mirrors

Head, pixel accuracy 0.03mm

Third station (size) :

Detect product dimensions, inner diameter, appearance, line diameter, roundness, circumference, raw edge, hole plugging, etc.

Dimensional accuracy ±0.01mm

Fourth station (lower surface) :

Detect the appearance defect of the lower surface of the product, the configuration and accuracy are the same as the first station

The fifth station (external closing line) :

Detect the appearance defects of the outer side of the product. This station is configured with the second station

Detail presentation

Lens switching mechanism

Detect size, burr camera

Detect the upper and lower appearance of the camera

Rubber extrusion mechanism

Detection of external mode line phase unit

Thickness measuring camera

Product turnover mechanism